193 pur-si solar www.vishay.com vishay bccomponents revision: 31-jan-17 1 document number: 28407 for technical questions, contact: aluminumcaps2@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 aluminum electrolytic capacitors power ultra high ripple current snap-in for solar fig. 1 features ? long useful life: 6000 h at +105 c ? specified for 500 v, 50 c operation ? high ripple current capability ? high reliability ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 applications ? solar pv inverters ? industrial motor control ? power supply marking the capacitors are marked (where possible) with the following information: ? rated capacitance (in f) ? tolerance code on rated capacitance, code letter in accordance with iec 60062 ( 20 %) ? rated voltage (in v) ? two digit date code, in accordance with iec 60062 ? name of manufacturer ? code for factory of origin ? - sign to identify the nega tive terminal, visible from the top and side of the capacitor ? code number ? climatic category in accordance with iec 60068 ? ll for long life grade quick reference data description value nominal case size ? (d x l in mm) 35 x 30 to 35 x 60 rated capacitance range, c r 220 f to 560 f tolerance on c r 20 % rated voltage, u r 500 v rated temperature ra nge -40 c to +50 c category voltage, u c 450 v category temperature range -40 c to +105 c useful life at u c , 105 c, ? i r applied 6000 h endurance at u r , 50 c, ? no ripple applied 5000 h shelf life at 0 v, 105 c 1000 h based on sectional speci fication iec 60384-4 / en130300 climatic category iec 60068 40 / 105 / 56 159 pul- s i (500 v) 19 3 pur- s i s olar 096 pll-4t s i higher temperature 85 c 4-terminal selection chart for c r , u r , and relevant nominal case sizes (? d x l in mm) c r (f) u r (v) 500 220 35 x 30 - - - - 330 - 35 x 40 - - - 390 - - 35 x 45 - - 470 - - - 35 x 50 - 560 - - - - 35 x 60
193 pur-si solar www.vishay.com vishay bccomponents revision: 31-jan-17 2 document number: 28407 for technical questions, contact: aluminumcaps2@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in millimeters and available forms two terminal snap-in fig. 2 - two terminal snap-i n fig. 3 - mountin g hole diagram table 1 note ? other case sizes, terminations and capacitance values available on request. note ? unless otherwise specified, all electrical values in table 2 apply at t amb = 20 c, p = 86 kpa to 106 kpa, rh = 45 % to 75 %. ordering example electrolytic capacitors 470 f / 500 v nominal case size: ? 35 mm x 50 mm ordering code: mal219390104e3 table 2 note (1) at u max. ? u c ? d l + 2 max. l bottom view 5.8 mm + 0 - 1 + terminal - terminal the minu s terminal can be marked with a black dot or with an imprinted - s ign. 10 0.1 ? 2 0.1 (2 x) dimensions in millimeters, mass and packaging quantities nominal case size ? d max. l max. mass (g) packaging quantities (unit per box) cardboard box dimensions l x w x h 35 x 30 36 32 40 50 390 x 198 x 44 35 x 40 36 42 56 50 390 x 198 x 54 35 x 45 36 47 64 50 390 x 198 x 59 35 x 50 36 52 72 50 390 x 198 x 64 35 x 60 36 62 88 50 390 x 198 x 74 electrical data symbol description c r rated capacitance at 100 hz i r rated rms ripple current at 100 hz and 105 c i l1 max. leakage current after 1 min at u r esr max. equivalent series resistance at 100 hz z max. impedance at 10 khz electrical data and ordering information u r (v) u c (v) c r (f) case size ? d x l (mm) i r 100 hz 105 c (a) (1) i l 1 min (ma) esr 100 hz max. (m ? ) z 10 khz max. (m ? ) ordering code 500 450 220 35 x 30 1.35 0.6 900 600 mal219390101e3 330 35 x 40 1.74 0.9 600 400 mal219390102e3 390 35 x 45 1.94 1.1 500 350 mal219390103e3 470 35 x 50 2.18 1.3 450 300 mal219390104e3 560 35 x 60 2.52 1.5 350 250 mal219390105e3
193 pur-si solar www.vishay.com vishay bccomponents revision: 31-jan-17 3 document number: 28407 for technical questions, contact: aluminumcaps2@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ripple current and useful life table 3 note ? multiplier of useful life code: mga454 fig. 4 - multiplier of useful life as a function of ambient temperature and ripple current load additional electrical data parameter conditions value voltage surge voltage u s = 1.1 x u c reverse voltage u rev ? 1 v current leakage current after 1 min at u r i l1 ? 0.006 c r x u c after 5 min at u r i l5 ? 0.002 c r x u c inductance equivalent series inductance (esl) all case sizes ca. 20 nh endurance test duration and useful life endurance at 50 c, 500 v (h) useful life at 105 c, 450 v (h) 5000 6000 1.3 1.2 1.1 1.0 0.8 0.5 0.0 40 50 60 70 80 90 t amb (c) i a i r 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 (1) 2.4 2.5 2.6 2.7 100 110 2 7 life multiplier 1 1.2 1.5 2.5 3 4 5 10 15 20 30 40 60 100 150 200 300 400 600 m g a454 i a = actual ripple current at 120 hz i r = rated ripple current at 120 hz and 105 c (1) u s eful life at 105 c and i r applied: 6000 h
193 pur-si solar www.vishay.com vishay bccomponents revision: 31-jan-17 4 document number: 28407 for technical questions, contact: aluminumcaps2@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 table 4 table 5 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? statements about product lifetime are based on calculations and in ternal testing. they should only be interpreted as estimation s. also due to external factors, the lifetime in the field application may deviate from the calculated lifetime. in general, nothing stated herein shall be construe d as a guarantee of durability. multiplier of ripple current (i r ) as a function of frequency frequency (hz) 50 100 120 200 1000 ? 10 000 i r multiplier 0.90 0.95 1.00 1.15 1.30 1.40 test procedures and requirements test procedure (quick reference) requirements name of test reference endurance iec 60384-4 / ? en130301 ? subclause 4.13 t amb = 50 c; u r = 500 v applied; ? 5000 h ? c/c: 15 % esr ? 1.5 x spec. limit z ? 2 x spec. limit i l5 ? spec. limit useful life en130301 ? subclause 1.8.1 t amb = 105 c; u c and i r applied; ? 6000 h ? c/c: 30 % esr ? 3 x spec. limit z ? 3 x spec. limit i l5 ? spec. limit no short or open circuit, ? no visible damage total failure percentage ? 1 % shelf life ? (storage at ? high temperature) iec 60384-4 / ? en130300 ? subclause 4.17 t amb = 105 c; no voltage applied; ? 1000 h after test: u c to be applie d for 30 min, ? 24 h to 48 h befo re measurement ? c/c: 15 % esr ? 1.5 x spec. limit i l5 ? 2 x spec. limit
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
